Dasan V8102 - SNMP View Record; Permission to Access SNMP View Record

UMN:CLI User Manual
V8102
148
no snmp group GROUP [{v1 |
v2c | v3} [SECURITY]]
Deletes SNMP group, enter the group name.
GROUP: group name
show snmp group
Enable
Global
Shows a created SNMP group.
7.1.7 SNMP View Record
You can create an SNMP view record to limit access to MIB objects with object identity
(OID) by an SNMP manager.
To configure an SNMP view record, use the following command.
Command
Mode
Description
snmp view VIEW {included |
excluded} OID [MASK]
Global
Creates an SNMP view record.
VIEW: view record name
included: includes a sub-tree.
excluded: excludes a sub-tree.
OID: OID number
no snmp view VIEW [OID]
Deletes a created SNMP view record.
VIEW: view record name
To display a created SNMP view record, use the following command.
Command
Mode
Description
show snmp view
Enable
Global
Shows a created SNMP view record.
The following is an example of creating an SNMP view record.
SWITCH(config)# snmp view TEST included 410
SWITCH(config)# show snmp view
View List
ViewName Type SubTree / Mask
-------------------------------------------
TEST included 410
SWITCH(config)#
7.1.8 Permission to Access SNMP View Record
To grant an SNMP group to access to a specific SNMP view record, use the following
command.
Command
Mode
Description
snmp access GROUP {v1 | v2c}
READ-VIEW WRITE-VIEW NOTI-
FY-VIEW
Global
Grants an SNMP group to access a specific SNMP
view record.
GROUP: group name
snmp access GROUP v3 {no-
Grants an SNMP version 3 group to access a specific