User Manual UMN:CLI
V8102
59
3.2 Useful Tips
This section describes useful tips for operating the V8102 with a CLI.
• Listing Available Command
• Calling Command History
• Using Abbreviation
• Using Command of Privileged EXEC Enable Mode
• Exit Current Command Mode
3.2.1 Listing Available Command
To list available commands, input question mark <?> in the current mode. When you input
the question mark <?>, you can see available commands used in this mode and variables
following after the commands.
The following is the available commands on Privileged EXEC Enable mode of the V8102.
SWITCH# ?
Exec commands:
clear Reset functions
clock Manually set the system clock
configure Enter configuration mode
copy Copy from one file to another
debug Debugging functions
default-os Select default OS
disconnect Disconnect user connection
enable Turn on privileged mode command
erase Erase saved configuration
exit End current mode and down to previous mode
halt Halt process
help Description of the interactive help system
no Negate a command or set its defaults
ping Send echo messages
quote Execute external command
rcommand Management stacking node
release Release the acquired address of the interface
(Omitted)
SWITCH#
Question mark <?> will not be shown in the screen and you do not need to press
<ENTER> key to display the command list.
If you need to find out the list of available commands of the current mode in detail, use
the following commands.
Shows available commands of the current mode.
Shows available commands of the current mode with
tree structure.
To Next Page
Loading...