UMN:CLI User Manual
V8102
358
9.3.10.1 Scheduling mode
To select a packet scheduling mode, use the following command.
qos scheduling-mode {sp |
wrr | dwrr}
Selects a packet scheduling mode for an inter-
face:
sp: strict priority queuing
wrr: weighted round robin
drr: deficit round robin
qos cpu scheduling-mode
{sp | wrr}
Sets CPU packet scheduling mode.
sp: strict priority queuing
The default scheduling mode is WRR. And it is possible to assign a different scheduling
mode to each port.
9.3.10.2 Weight and Quantum
To set a weight for WRR scheduling mode, use the following command.
qos weight {<0-7> | all} {<1-
127> | unlimited}
Sets a weight for each port and queue:
PORTS: port numbers
0-7: queue number
1-127: weight value (default: 1)
unlimited: strict priority queuing
qos cpu weight <0-7> {<1-15>
| unlimited}
Sets a weight of queue for CPU packets:
0-7: queue number
1-15: weight value
unlimited: strict priority based queuing
To set a quantum for DRR scheduling mode, use the following command.
qos quantum {<0-7> | all}
{<1-127> | unlimited}
Sets a quantum for each port and queue:
PORTS: port numbers
0-7: queue number
1-127: quantum value (default: 1)
unlimited: strict priority queuing
To Next Page
Loading...