UMN:CLI User Manual
V8102
882
13.11 Multicast Profile
The multicast profile is used for ONU (ONT) to handle the multicast traffic using a IGMP-
related commands. Multicast profile managed entity organizes data associated with mul-
ticast management at subscriber ports of 802.1 bridges, including 802.1p mappers when
the provisioning model is mapper-based rather than bridge-based. Instances of this man-
aged entity are created and deleted by the OLT. It is the responsibility of the OLT to man-
age the members of a multicast group and control the multicast connection in ONTs
13.11.1 Creating Multicast Profile
To create a multicast profile, use the following command.
multicast-profile NAME create
Creates a multicast profile.
NAME: multicast profile name
After opening Multicast Profile Configuration mode, the prompt changes from
SWITCH(config)# to SWITCH(config-mcast-profile[NAME])#.
To delete a created multicast profile, use the following command.
no multicast-profile {NAME | all}
Deletes a created multicast profile.
NAME: multicast profile name
To modify an existing multicast profile, use the following command.
multicast-profile NAME modify
Modifies the existing multicast profile.
NAME: multicast profile name
To Next Page
Loading...