Dasan V8102 - ADVA Alarm Severity; ERP Domain Alarm Severity

User Manual UMN:CLI
V8102
155
no snmp alarm-severity port-thread-over
no snmp alarm-severity power-fail
no snmp alarm-severity power-remove
no snmp alarm-severity rmon-alarm-rising
no snmp alarm-severity rmon-alarm-falling
no snmp alarm-severity system-restart
no snmp alarm-severity module-remove
no snmp alarm-severity temperature-high
no snmp alarm-severity cli-history
7.1.11.5 ERP Domain Alarm Severity
To set ERP domain alarm severity, use the following command.
Command
Mode
Description
snmp alarm-severity erp-domain-lotp {critical |
major | minor | warning | intermediate}
Global
Sets erp domain lopt severity.
snmp alarm-severity erp-domain-multi-rm
{critical | major | minor | warning | intermedi-
ate}
Sets erp domain multiple rm severity.
snmp alarm-severity erp-domain-reach-fail
{critical | major | minor | warning | intermedi-
ate}
Sets erp domain reachable fail severity.
snmp alarm-severity erp-domain-ulotp {critical
| major | minor | warning | intermediate}
Sets erp domain ulotp severity.
To delete configured ERP domain alarm severity, use the following command.
Command
Mode
Description
no snmp alarm-severity erp-domain-lotp
Global
Deletes configured erp domain alarm
severity.
no snmp alarm-severity erp-domain-multi-rm
no snmp alarm-severity erp-domain-reach-fail
no snmp alarm-severity erp-domain-ulotp
7.1.11.6 ADVA Alarm Severity
To set ADVA alarm severity, use the following command.
Command
Mode
Description
snmp alarm-severity adva-fan-fail {critical |
major | minor | warning | intermediate}
Global
Sets ADVA severity of an alarm for sys-
tem temperature high.
snmp alarm-severity adva-if-misconfig {critical
| major | minor | warning | intermediate}
Sets ADVA severity of an alarm for
wrong configuration.
snmp alarm-severity adva-if-opt-thres {critical |
Sets ADVA severity of an alarm for traf-