Dasan V8102 - 1 Introduction; Audience; Document Structure; Tab. 1.1 Overview of Chapters

User Manual UMN:CLI
V8102
41
1 Introduction
1.1 Audience
This manual is intended for V8102 multi-platform PON OLT system operators and
maintenance personnel for providers of Gigabit passive optical network (GPON) and
Ethernet services. This manual assumes that you are familiar with the following:
• Ethernet networking technology and standards
• Internet topologies and protocols
• PON technology and standards
• Usage and functions of graphical user interfaces.
1.2 Document Structure
Tab. 1.1 briefly describes the structure of this document.
Chapter
Description
1 Introduction
Introduces the overall information of the document.
2 System Overview
Introduces the V8102 system. It also lists the features of the
system.
3 Command Line Interface (CLI)
Describes how to use the Command Line Interface (CLI).
4 System Basic Configuration and Operation
Describes how to manage the system account and IP ad-
dress.
5 Equipment/Interface Management
Descibes the slot assignment and how to configure the plug-
in places of the chassis and replace the IUs.
6 System Environment
Describes how to configure the system environment and
management functions.
7 Network Management
Describes how to configure the network management func-
tions.
8 System Security
Describes how to configure the system security functions.
9 System Main Functions
Describes how to configure the system main functions.
10 IP Multicast
Describes how to configure the IP multicast functions.
12 IP Routing Protocol
Describes how to configure the IP routing protocols.
12 GPON Configuration
Describes how to configure the GPON functions.
14 System Software Upgrade
Describes how to upgrade the system software.
15 Abbreviations
Lists all abbreviations and acronyms which appear in this
document.
Tab. 1.1 Overview of Chapters