User Manual UMN:CLI
V8102
355
9.3.8 Displaying Admin Rule
To show an admin rule profile configured by user, use the follwing command.
Shows a profile of admin flow.
show policy-profile admin
Shows a profile of admin policy.
The following command can be used to show a certain rule by its name, all rules of a cer-
tain type, or all rules at once sorted by a rule type.
show { flow | class | policy }
admin [NAME]
Shows the information relating to each rule, enter an
admin rule name.
show { flow | class | policy }
admin detail [NAME]
show running-config { admin-
flow | admin-policy }
Shows all configurations of admin rules.
9.3.9 Displaying Policy Interface Configuration
To show a configuration about poclicy interface, use the following command.
show policy interface {chan-
nelgroup | gpon | tengiga-
bitethernet} IFPORT
Shows a configured policy on specified interface.
show policy interface vlan
VLANID
To Next Page
Loading...