Dasan V8102 - Range of Ipv6 Address

User Manual UMN:CLI
V8102
435
FERRED_LIFETIME}
VALID_LIFETIME: valid lifetime <60-315360000>
(default: 2592000 seconds)
PREFERRED_LIFETIME: preferred lifetime <60-
315360000> (default: 604800 seconds)
VALID_LIFETIME: valid lifetime <1-5256000> (default:
432000 minutes)
PREFERRED_LIFETIME: preferred lifetime <1-
5256000> (default: 10080 minutes)
no fixed-address X:X::X:X
Deletes a specified static IPv6 assignment.
9.7.1.5 Domain Name
To set a domain name, use the following command.
Command
Mode
Description
domain-name DOMAIN
DHCPv6
Pool
Sets a domain name.
DOMAIN: a domain name
no domain-name
Deletes the configured domain name.
9.7.1.6 DNS Server
The DNS server option is used to inform clients of DNS server addresses. The address of
the DNS server should be statically configured in the DHCPv6 server configuration.
To specify a DNS server to inform DHCP clients, use the following command.
Command
Mode
Description
dns-server X:X::X:X
DHCPv6
Pool
Specifies a DNS server.
X:X::X:X: DNS server IPv6 address
no dns-server X:X::X:X
Deletes a specified DNS server.
9.7.1.7 Range of IPv6 Address
To specify a range of IP addresses that will be assigned to DHCP clients, use the follow-
ing command.
Command
Mode
Description
range X:X::X:X X:X::X:X [{second
<60-315360000> <60-
315360000> | minute <1-
5256000> <1-5256000>}]
DHCPv6
Pool
Specifies a range of IPv6 addresses.
X:X::X:X : start/end IPv6 address
60-315360000: valid life time (unit: second, default:
2592000)
60-315360000: preferred life time (unit: second, de-
fault: 604800)
1-5256000: valid life time (unit: minute, default: 43200)
1-5256000: preferred life time (unit: minute, default:
10080)
no range X:X::X:X X:X::X:X
Deletes the specified range of IP addresses.