UMN:CLI User Manual
V8102
68
The account of level 0 to level 14 without any configuring authority only can use exit and
help in Privileged EXEC View mode and cannot access to Privileged EXEC Enable mode.
The account with the highest level 15 has a read-write authority.
To change the name of the created account, user the following command.
user rename NAME_FROM
NAME_TO [DESC]
Changes a created account
NAME_FROM: user name to change (from)
NAME_TO: user name to be changed (to)
DESC: user description
To delete the created account, use the following command.
Delete the created account.
To display a created account, use the following command.
show usermac [interface {tengi-
gabitethernet IFPORT | gpon
IFPORT}]
Shows the latest user’s mac address.
4.1.3.5 Login Banner
It is possible to set system login and log-out banner. Administrator can leave a message
to other users with this banner.
To set system login and log-out banner, use the following command.
Sets a banner before login the system.
Sets a banner when successfully log in the system.
Sets a banner when failing to login the system.
To restore a default banner, use the following command.
Restores a default banner.
To Next Page
Loading...