Dasan V8102 - Displaying Dump Packets; Dump File

UMN:CLI User Manual
V8102
236
7.17.4 Displaying Dump Packets
To display the dump packets, use the following command.
Command
Mode
Description
show dump packets
Enable
Global
Shows the dump packets.
7.17.5 Dump File
To back up a dump file using FTP or TFTP, use the following command.
Command
Mode
Description
copy {ftp | tftp} dumpfile upload
[FILE-NAME ]
Enable
Uploads a dump file to FTP or TFTP server with the
name configured by user.
To access FTP to back up the configuration or use the backup file, you should know FTP
user ID and the password. To back up the dump file through FTP, you can recognize the
file transmission because hash function is automatically turned on.
To delete a dump file, use the following command.
Command
Mode
Description
delete dumpfile [FILENAME]
Enable
Deletes a specified dump file.
FILENAME: dump file name
To display a list of dump files, use the following command.
Command
Mode
Description
show dumpfile-list
Enable
Shows a current startup configuration.
i