Dasan V8102 - GPON Debug

User Manual UMN:CLI
V8102
893
13.14 GPON Debug
To enable debugging of all GPON or a specific feature of GPON, use the following com-
mand.
Command
Mode
Description
debug gpon { all | func | db |
comm | ugrd | profile | queue |
statistics | rauth}
Global
Enables GPON debugging.
all: all GPON features
func: GPON function
db: GPON database
comm.: GPON communication
ugrd: GPON auto-upgrade
profile: GPON profile
queue: GPON queue
statistics: GPON statistics
rauth: RADIUS authentication
no debug gpon {all | func | db |
comm | ugrd | profile | queue |
statistics| rauth }
Disables GPON debugging.
To display the debugging status of GPON, use the following command.
Command
Mode
Description
show debug gpon
Enable
Global
Shows the debugging status of GPON.
show debugging gpon
13.15 Sample Configuration
Configuration Example 1
SWITCH(config)# voip-profile voip create
SWITCH(config-voip-profile[voip])# codec-nego 1 codec pcma packet-period 10
silence-suppression 1
SWITCH(config-voip-profile[voip])# codec-nego 2 codec pcmu packet-period 10
silence-suppression 1
SWITCH(config-voip-profile[voip])# codec-nego 3 codec g729 packet-period 10
silence-suppression 1
SWITCH(config-voip-profile[voip])# codec-nego 4 codec g723 packet-period 10
silence-suppression 1
SWITCH(config-voip-profile[voip])# pstn-protocol-variant 616
SWITCH(config-voip-profile[voip])# protocol sip
SWITCH(config-voip-profile[voip]-sip)# proxy-server proxy.xxxxx.com
SWITCH(config-voip-profile[voip]-sip)# outbound-proxy-server proxy.xxxxx.com
SWITCH(config-voip-profile[voip]-sip)# register-server proxy.xxxxx.com
SWITCH(config-voip-profile[voip]-sip)# host-part-server proxy.xxxxx.com