Dasan V8102 - Dhcpv6 Options

UMN:CLI User Manual
V8102
436
9.7.1.8 DHCPv6 Options
DHCPv6 can be used in two ways. The first way of using DHCPv6 is to grant clients address-
es from a pool while also using DHCPv6 to push configuration options. This is called stateful
configuration. The other option is to use DHCPv6 combined with SLAAC for addressing, while
using DHCPv6 for configuration options. This is called stateless configuration. DHCP for IPv6
for stateless configuration allows a DHCP for IPv6 client to export configuration parameters
(that is, DHCP for IPv6 options) to a local DHCP for IPv6 server pool. The local DHCP for IPv6
server can then provide the imported configuration parameters to other DHCP for IPv6 clients.
To configure the NIS server DHCPv6 option, use the following command.
Command
Mode
Description
nis domain-name DOMAIN
DHCPv6
Pool
Sets a domain name of a NIS server.
DOMAIN: a domain name of the NIS server for client to
use
nis address X:X::X:X
Specifies the NIS server address to be sent to the cli-
ent.
X:X::X:X: NIS server IPv6 address
no nis domain-name
Removes the NIS domain name.
no nis address X:X::X:X
Removes the NIS server address.
To configure the NIS+ server DHCPv6 option, use the following command.
Command
Mode
Description
nisp domain-name DOMAIN
DHCPv6
Pool
Sets a domain name of a NIS+ server.
DOMAIN: a domain name of the NIS+ server for client
to use
nisp address X:X::X:X
Specifies the NIS+ server address to be sent to the
client.
no nisp domain-name
Removes the NIS+ domain name.
no nisp address X:X::X:X
Removes the NIS+ server address.
To configure the SIP server DHCPv6 option, use the following command.
Command
Mode
Description
sip domain-name DOMAIN
DHCPv6
Pool
Sets a domain name of a SIP server.
DOMAIN: a domain name of the SIP server for client
to use
sip address X:X::X:X
Specifies the SIP server address to be sent to the cli-
ent.
no sip domain-name
Removes the SIP domain name.
no sip address X:X::X:X
Removes the SIP server address.