UMN:CLI User Manual
V8102
360
unicast: unicast queue
non-unicast: non-unicast queue
no qos buffer egress {<0-7> |
all} max-limit {unicast | non-
unicast}
Removes the buffer cell limit values.
no qos buffer egress {<0-7> |
all} min-limit {unicast | non-
unicast}
To display the configured guaranteed buffer size of the port and queue number, use the
following command.
show qos buffer-config {gigabitethernet
| tengigabitethernet | gpon } IFPORT
{unicast | non-unicast}
Shows the configured guaranteed buffer size of
the port.
show interface queue-status all {unicast
| non-unicast}
Shows the unicast/multicast packet buffer usage
status per queue.
IFPORTS: interface port number
unicast: unicast traffic
non-unicast: multicast traffic
show interface queue-status cpu
show interface queue-status {giga-
bitethernet | tengigabitethernet | gpon
IFPORT {unicast | non-unicast}
show interface statistics {avg-perq |
buffer } all {unicast | non-unicast}
Shows the traffic statistics of buffer or the aver-
age packet per queue for all Ethernet/PON
ports.
unicast: unicast traffic
non-unicast: multicast traffic
show interface statistics {avg-perq |
buffer } cpu
Shows the incoming traffic statistics of buffer or
the average packet per queue into CPU.
show interface statistics {avg-perq |
buffer } {gigabitethernet | tengiga-
bitethernet | gpon } IFPORT {unicast |
non-unicast}
Shows the traffic statistics of buffer or the aver-
age packet per queue for a specified Ether-
net/PON port.
IFPORTS: interface port number
unicast: unicast traffic
non-unicast: multicast traffic
9.3.10.5 Displaying QoS
To display the configuration of QoS, enter following command.
Enable
Global
Interface
[XE/GE/GPON]
Shows the configuration of QoS for all ports.
show qos interface {giga-
bitethernet | tengigabitether-
net | gpon } IFPORT
Shows the configuration of QoS per each port.
Shows the configuration of QoS for CPU
packets.
To Next Page
Loading...