Dasan V8102 - GPON Configuration Mode; Tab. 3.10 Main Command of Route-Map Configuration Mode; Tab. 3.11 Main Command of ONU Profile Configuration Mode; Tab. 3.12 Main Command of DBA Profile Configuration Mode

UMN:CLI User Manual
V8102
58
<0-65535>
Tab. 3.10 shows main commands of Route-map Configuration mode.
Command
Description
match
Classifies routing information to permit or deny.
set
Configures routing information options.
Tab. 3.10 Main Command of Route-map Configuration Mode
3.1.12 GPON Configuration Mode
There are two GPON Configuration mode; onu-profile, dba-profile. You can configure
GPON-related functions. To open PON Configuration mode, enter the following command,
then the system prompt will be changed from SWITCH(config)# to SWITCH(config-onu-
profile[profile-name])# / SWITCH(config-dba-profile[profile-name])# .
Command
Mode
Description
onu-profile NAME create
Global
Opens ONU-profile Configuration mode.
dba-profile NAME create
Opens DBA-profile Configuration mode.
Tab. 3.11 shows main commands of ONU profile Configuration mode.
Command
Description
dba-profile
Applies the DBA profile to ONU profile.
dhcp-opt254-append
Adds DHCP option 254 fileld for ONU.
igmp-snooping
Configures an ONU’s Ethernet port-related function.
Tab. 3.11 Main Command of ONU profile Configuration Mode
Tab. 3.12 shows main commands of DBA profile Configuration mode.
Command
Description
link-sla
Configures SLA link state.
queue-sla
Configures SLA queue value.
sr-report-interval
Configures the interval for SR reporting.
Tab. 3.12 Main Command of DBA profile Configuration Mode