Dasan V8102 - Facility Code

UMN:CLI User Manual
V8102
174
To display the syslog messages on the SD card, use the following command.
Command
Mode
Description
show syslog external sdcard
slot SLOT_NUMBER {|file FILE-
NAME} {|<1-4294967295> | re-
verse {|<1-4294967295>}}
Global
Shows the information of syslog messages written on
the SD card.
<1-4294967295>: line number
SLOT_NUMBER:
FILE-NAME: log file name
STARTDATE: YYYY/MM/DD (ex. 2000/01/01)
STARTTIME: HH:MM:SS (ex. 13:01:01)
ENDDATE: YYYY/MM/DD (ex. )
ENDTIME: HH:MM:SS (ex. 13:01:01)
show syslog external sdcard
slot SLOT_NUMBER {|file FILE-
NAME) date from STARTDATE
{|STARTTIME} {|to ENDDATE | to
ENDDATE ENDTIME} {|<1-
4294967295> | reverse {|<1-
4294967295>}}
show syslog external sdcard
slot SLOT_NUMBER {|file FILE-
NAME} date to ENDDATE
{|ENDTIME} {|<1-4294967295> |
reverse {|<1-4294967295>}}
show syslog external sdcard
slot SLOT_NUMBER file-list
show syslog external sdcard sfu
{|file FILENAME} {|<1-
4294967295> | reverse {|<1-
4294967295>)}
show syslog external sdcard sfu
{|file FILENAME} date from
STARTDATE {|STARTTIME} {|to
ENDDATE | to ENDDATE END-
TIME} {|<1-4294967295> | re-
verse {|<1-4294967295>}}
show syslog external sdcard sfu
{|file FILENAME} date to
ENDDATE {|ENDTIME} {|<1-
4294967295> | reverse {|<1-
4294967295>}}
show syslog external sdcard sfu
file-list
7.4.2 Facility Code
You can set a facility code of the generated syslog message. This code make a syslog
message distinguished from others, so network administrator can handle various syslog
messages efficiently.
To set a facility code, use the following command.
Command
Mode
Description
syslog local-code <0-7>
Global
Sets a facility code.