Dasan V8102 - ONU Service Profile

UMN:CLI User Manual
V8102
892
13.13 ONU Service Profile
The V8102 provides numerous functions to customize a GPON network with many CLI
commands and parameters. Each ONU profile can be designed with several profiles such
as T-CONT, DBA and VoIP to meet the requirement of data bandwidth, VoIP access and
the advanced security issues. The V8102 also provides the service ONU profile for cus-
tomer convenience. You can apply one of ONU profiles as the default profile to all ONUs
or apply an ONU profile to specified ONUs with a given model name.
To apply a default ONU profile to all ONUs(ONTs), use the following command.
Command
Mode
Description
olt service-profile default PRO-
FILE
Global
Applies a default ONU profile to all ONUs.
PROFILE: existing ONU profile name
To apply an ONU profile to specified ONUs(ONTs) with a given model name, use the fol-
lowing command.
Command
Mode
Description
olt service-profile model-name
NAME PROFILE
Interface
[GPON]
Applies an ONU profile to specified ONUs with a given
model name.
NAME: ONU model name
PROFILE: existing ONU profile name
If you try to configure a default profile for all ONUs when a specified service ONU profile
is already applied to ONUs with a given model name, the default ONU profile will be ap-
plied only to the ONUs that do not have specific profiles.
To release the default ONU profile from all ONUs(ONTs), use the following command.
Command
Mode
Description
no olt service-profile
Interface
[GPON]
Releases a default/service ONU profile from all ONUs.
no olt service-profile default
no olt service-profile model-
name NAME
To display the service ONU profile from all ONUs(ONTs), use the following command.
Command
Mode
Description
show olt service-profile
Enable
Global
Interface
[GPON]
Shows the configured service ONU profiles.
i