UMN:CLI User Manual
V8102
508
10.2.6.2 IGMP Throttling
You can configure the maximum number of multicast groups that a host on a port can join.
To specify the maximum number of IGMP groups per port, use the following command.
ip igmp max-groups port PORTS
count <1-2147483647>
Specifies the maximum number of IGMP groups for a
port.
PORTS: logical port number
1-2147483647: number of IGMP groups
ip igmp max-groups port sum
count <1-2147483647>
Specifies the sum of IGMP groups for all of ports.
sum: sum of all port counters
no ip igmp max-groups port
{PORTS | sum}
Deletes a specified maximum number of IGMP groups.
To specify the maximum number of IGMP groups for the system, use the following com-
mand.
ip igmp max-groups system
count <1-2147483647>
Specifies the maximum number of IGMP groups for the
system.
1-2147483647: number of IGMP groups
no ip igmp max-groups system
Deletes a specified maximum number of IGMP groups.
10.2.6.3 Displaying IGMP Filtering and Throttling
To display a configuration for IGMP filtering and throttling, use the following command.
show ip igmp filter [port PORTS]
Shows a configuration for IGMP filtering and throttling.
PORTS: port number (1/1, 1/2, 2/1, …)
To display existing IGMP profiles, use the following command.
show ip igmp profile
[<1-2147483647>]
Shows existing IGMP profiles.
1-2147483647: IGMP profile number
To Next Page
Loading...