User Manual UMN:CLI
V8102
693
ipv6 ospf restart helper only-upgrade max-
grace-period <1-1800> [only-reload]
To release the configuration, use the following command.
no ipv6 ospf restart grace-period
Releases the configuration.
Never: prevent the neighbor from enter-
ing helper mode.
A.B.C.D: router ID of neighbor tonever
to act as helper.
ipv6 ospf restart helper never [router-id
A.B.C.D]
no ipv6 ospf restart helper max-grace-period
12.3.9 Default Route
You can configure ASBR (Autonomous System Boundary Router) to transmit default
route to OSPF network. Autonomous System Boundary router transmits route created ex-
ternally to OSPF network. However, it does not create system default route.
To have autonomous System Boundary router create system default route, use the follow-
ing command.
default-information originate
Configures the default route.
The following items are detail options for the Default Route configuration.
• metric
Configures Metric value of the default route.
• metric-type 1 | 2
is for type of finding the path. metric-type 1 uses internal path cost with external path
cost as a cost, metric type 2 always uses external cost value only.
• always
Transmits the default route to outside.
• route-map
Transmits specific routing information to assigned route which has MAP-NAME.
The detail options for default route configuration are classified in 4 as above, and those
configurations can be selected more than 2 options without order.
The following is explaining options of command:
• metric <0-16777214>
• metric-type <1-2>
• always
• route-map MAP-NAME
To Next Page
Loading...