Dasan V8102 - Displaying MLD Information

UMN:CLI User Manual
V8102
554
clear ipv6 mld if flap discredit
[{gigabitethernet | tengiga-
bitethernet | gpon | chan-
nelgroup} IFPORT]
Enable
Global
Restores the current credit to a default value (100).
clear ipv6 mld if flap discredit
vlan VLANS
11.1.8 Displaying MLD Information
To display current MLD groups and relevant information, use the following command.
Command
Mode
Description
show ipv6 mld groups detail
Enable
Global
Shows the multicast groups with receivers directly
connected to the router and learned through MLD.
X:X::X:X: IPv6 multicast group address
IFNAME: interface name
show ipv6 mld groups X:X::X:X
[detail]
show ipv6 mld groups {tengiga-
bitethernet | gpon | chan-
nelgroup} IFPORT [detail]
show ipv6 mld groups vlan
VLANID [detail]
show ipv6 mld groups IFNAME
X:X::X:X [detail]
show ipv6 mld interface {tengi-
gabitethernet | gpon | chan-
nelgroup} IFPORT
show ipv6 mld interface vlan
VLANID
To display IPv6 MLD proxy information, use the following command.
Command
Mode
Description
show ipv6 mld-proxy
Enable
Global
Shows the IPv6 MLD proxy information,
To display IPv6 MLD proxy group information, use the following command.
Command
Mode
Description
show ipv6 mld-proxy groups
Enable
Global
Shows the IPv6 MLD host-side group membership
information.
show ipv6 mld-proxy groups
{detail | X:X::X:X detail | sum-
mary}
show ipv6 mld-proxy groups
{tengigabitethernet IFPOR |
gpon IFPORT | channelgroup