UMN:CLI User Manual
V8102
616
12.1.15.4 Session Reset of External Peer
You can reset the session of BGP router connected to external AS. To reset a BGP con-
nection for all external peers, use the following command.
Resets the session of all external AS peers.
See Section 12.1.15.1 when you configure the detail parameters.
To reset the sessions of BGP router connected to external AS and initialize the details of
route configurations, use the following command.
clear bgp external in [prefix-
filter]
Resets the session of BGP router connected to exter-
nal AS.
in: clears incoming advertised routes.
prefix-filter: pushes out prefix-list ORF and does in-
bound soft reconfiguration.
external: clears all external peers.
clear ip bgp external in [prefix-
filter]
clear ipv6 bgp external in prefix-
filter
clear ip bgp external {unicast |
multicast} in [prefix-filter]
Resets the session of BGP router connected to exter-
nal AS.
external: clears all external peers.
out: clears outgoing advertised routes.
unicast | multicast : address family modifier
clear ip bgp external out
clear ipv6 bgp external WORD
out
clear ip bgp external {unicast |
multicast} out
clear bgp external soft [in | out]
Updates the route information only while the session is
possible of BGP router connected to external AS. Apply
the route either incoming or outgoing routes.
external: clears all external peers.
clear ip bgp external soft [in |
out]
clear ipv6 bgp external soft [in |
out]
clear ip bgp external {unicast |
multicast} soft [in | out]
12.1.15.5 Session Reset of Peer Group
To reset the session for all members of a peer group, use the following command.
clear bgp peer-group GROUP
To reset the session for all configured routers of speci-
To Next Page
Loading...