Dasan V8102 - Opaque-LSA Support

UMN:CLI User Manual
V8102
668
To configure the additional options for Graceful Restart, use the following command.
Command
Mode
Description
ospf restart grace-period <1-1800>
Global
Configures the additional options for
Graceful Restart.
ospf restart helper max-grace-period <1-1800>
ospf restart helper max-grace-period <1-1800>
only-reload [only-upgrade]
ospf restart helper max-grace-period <1-1800>
only-upgrade [only-reload]
ospf restart helper only-reload [only-upgrade]
ospf restart helper only-reload only-upgrade
max-grace-period <1-1800>
ospf restart helper only-reload max-grace-
period <1-1800> [only-upgrade]
ospf restart helper only-upgrade [only-reload]
ospf restart helper only-upgrade only-reload
max-grace-period <1-1800>
ospf restart helper only-upgrade max-grace-
period <1-1800> [only-reload]
To release the configuration, use the following command.
Command
Mode
Description
no ospf restart grace-period
Global
Releases the configuration.
ospf restart helper never [router-id A.B.C.D]
no ospf restart helper max-grace-period
12.2.9 Opaque-LSA Support
Opaque-LSA is LSA Type-9, Type-10, Type-11. The V8102 enables Opaque-LSA as a de-
fault but it can be released by user.
To release the enabled Opaque-LSA management, use the following command.
Command
Mode
Description
no capability opaque
Router
Releases the enabled Opaque-LSA management.
To enable Opaque-LSA management, use the following command.
Command
Mode
Description
capability opaque
Router
Enables Opaque-LSA management.