Dasan V8102 - AS Interval Adjustment; Neighbor Capability Dynamic; Unchanged Attributes Advertisement

User Manual UMN:CLI
V8102
623
no neighbor {A.B.C.D | X:X::X:X |
WORD} allowas-in
Resets to default.
12.1.17.12 AS Interval Adjustment
This command is used to change the minimum interval between the sending AS-
origination routing updates. To adjust the interval of sending AS origination routing up-
dates, use the following command.
Command
Mode
Description
neighbor {A.B.C.D | X:X::X:X |
WORD} as-origination-interval
<1-600>
Router
Changes the minimum interval between the sending
AS origination routing updates.
A.B.C.D: BGP neighbor IP address
X:X::X:X: BGP neighbor IPv6 address
WORD: BGP peer group
1-600: AS origination interval in seconds.
no neighbor {A.B.C.D | X:X::X:X |
WORD} as-origination-interval
[<1-600>]
Disables this function.
12.1.17.13 Unchanged Attributes Advertisement
To advertise unchanged BGP attributes to the specified neighbor, use the following com-
mand.
Command
Mode
Description
neighbor {A.B.C.D | X:X::X:X |
WORD} attribute-unchanged
[{as-path | next-hop | med}]
Router
Router AF
Advertises unchanged BGP attributes to the specified
neighbor.
A.B.C.D: BGP neighbor IP address
X:X::X:X: BGP neighbor IPv6 address
WORD: BGP peer group
as-path: AS path attribute
next-hop: Nexthop attribute
med: multi-exit discriminator attribute
no neighbor {A.B.C.D | X:X::X:X |
WORD} attribute-unchanged
[{as-path | next-hop | med}]
Disables this function.
12.1.17.14 Neighbor Capability Dynamic
Following command allows a BGP speaker to advertise or withdraw an address family
capability to a peer in a non-disruptive manner. To enable the dynamic capability for a
specific peer, use the following command.
Command
Mode
Description
neighbor {A.B.C.D | X:X::X:X |
WORD} capability dynamic
Router
Advertises unchanged BGP attributes to the specified
neighbor.
A.B.C.D: BGP neighbor IP address
X:X::X:X: BGP neighbor IPv6 address