Dasan V8102 - Page 154

UMN:CLI User Manual
V8102
154
snmp alarm-severity mfgd-block {critical |
major | minor | warning | intermediate}
Sets severity of an alarm for MAC flood
guard block.
snmp alarm-severity pim-group-filter {critical |
major | minor | warning | intermediate}
Sets severity of an alarm for pim group
filtering.
snmp alarm-severity port-link-down {critical |
major | minor | warning | intermediate}
Sets severity of an alarm for Ethernet
port link down.
snmp alarm-severity port-remove {critical |
major | minor | warning | intermediate}
Sets severity of an alarm for Ethernet
port removed.
snmp alarm-severity port-thread-over {critical |
major | minor | warning | intermediate}
Sets severity of an alarm for port thread
over.
snmp alarm-severity power-fail {critical | major
| minor | warning | intermediate}
Sets severity of an alarm for system
power failure.
snmp alarm-severity power-remove {critical |
major | minor | warning | intermediate}
Sets severity of an alarm for system
power removed.
snmp alarm-severity rmon-alarm-rising {criti-
cal | major | minor | warning | intermediate}
Sets severity of an alarm for RMON
alarm rising.
snmp alarm-severity rmon-alarm-falling {criti-
cal | major | minor | warning | intermediate}
Sets severity of an alarm for RMON
alarm falling.
snmp alarm-severity system-restart {critical |
major | minor | warning | intermediate}
Sets severity of an alarm for system
restart.
snmp alarm-severity module-remove {critical |
major | minor | warning | intermediate}
Sets severity of an alarm for module
removed.
snmp alarm-severity temperature-high {critical
| major | minor | warning | intermediate}
Sets severity of an alarm for system
temperature high.
snmp alarm-severity cli-history {critical | major
| minor | warning | intermediate}
Sets severity of an alarm for cli history
log.
To delete configured alarm severity, use the following command.
Command
Mode
Description
no snmp alarm-severity fan-fail
Global
Deletes configured alarm severity.
no snmp alarm-severity cold-start
no snmp alarm-severity broadcast-over
no snmp alarm-severity cpu-load-over
no snmp alarm-severity dhcp-lease
no snmp alarm-severity dhcp-illegal
no snmp alarm-severity fan-remove
no snmp alarm-severity ip-conflict
no snmp alarm-severity memory-over
no snmp alarm-severity mfgd-block
no snmp alarm-severity pim-group-filter
no snmp alarm-severity port-link-down
no snmp alarm-severity port-remove