UMN:CLI User Manual
V8102
48
Profile-based Management
With profile function, each OLT can be configured and managed. By creating several pro-
files to have some configurations, if an OLT is assigned to use an appropriate profile of
the profiles, the assigned profile will be automatically applied to the OLT. So the use of
profile provides easy and efficient manageability for the OLT conforming policies and ser-
vice environments of users.
Outband Management Interface
The V8102 can connect to equipments at remote place by assigning IP address to MGMT
interface. Since MGMT interface is operated regardless of status of service port, it is still
possible to configure and manage equipment at remote place even though problem such
as link disconnection is occurred.
RADIUS and TACACS+
The V8102 supports client authentication protocol, that is RADIUS (Remote Authentica-
tion Dial-In User Service) and TACACS+ (Terminal Access Controller Access Control Sys-
tem Plus). Not only user IP and password registered in switch but also authentication
through RADIUS server and TACACS+ server are required to access. So security of sys-
tem and network management is strengthened.
Secure Shell (SSH)
Network security is getting more important because the access network has been gener-
alized among numerous users. However, typical FTP and telnet service have big weak-
ness for their security. Secure shell (SSH) is a network protocol that allows establishing a
secure channel between a local and a remote computer. It uses public-key cryptography
to authenticate the remote computer and to allow the remote computer to authenticate the
user.
Security and Encryption clauses can be negotiated to operate only if there is a special re-
quest from the user.
To Next Page
Loading...