Dasan V8102 - Page 481

User Manual UMN:CLI
V8102
481
no ip igmp join-group
Deletes the configured IGMP static join group.
*: all addresses
no ip igmp join-group {A.B.C.D |
vlan VLAN}
no ip igmp join-group A.B.C.D
vlan VLAN_NAME [port PORT]
no ip igmp join-group A.B.C.D
vlan VLAN_NAME port PORT
reporter {A.B.C.D | *}
To configure the IGMP static join on VLAN mode, use the following command.
Command
Mode
Description
ip igmp static-group A.B.C.D
Interface
[VLAN]
Configures the IGMP static join group.
A.B.C.D: IGMP group address
ip igmp static-group range
A.B.C.D A.B.C.D
Configures the IGMP static join group.
A.B.C.D: Begin/End IGMP group address
no ip igmp static-group A.B.C.D
Deletes the configured IGMP static join group.
no ip igmp static-group range
A.B.C.D A.B.C.D
To configure the IGMP static join for a range of IGMP groups by access lists, use the fol-
lowing command.
Command
Mode
Description
ip igmp join-group list {<1-99> |
<1300-1999> | WORD}
vlan VLAN_NAME port PORT
[reporter A.B.C.D]
Global
Configures the IGMP static join for a range of IGMP
groups by access lists.
1-99: IP standard access list
1300-1999: IP standard access list (extended range)
WORD: access list name
VLAN_NAME: VLAN name
reporter: host address
no ip igmp join-group list {<1-
99> | <1300-1999> | WORD}
Deletes the configured IGMP static join for a range of
IGMP groups.
*: all addresses
no ip igmp join-group list {<1-
99> | <1300-1999> | WORD} vlan
VLAN_NAME [port PORT]
no ip igmp join-group list {<1-
99> | <1300-1999> | WORD} vlan
VLAN_NAME port PORT reporter
{A.B.C.D | *}
To display the IGMP static join group list, use the following command.
Command
Mode
Description
show ip igmp join-group
Enable
Shows the IGMP static join group list.