UMN:CLI User Manual
V8102
636
no-advertise: specifies routes not to be advertised to
other BGP peers
no-export: specifies routes not to be advertised
outside of Autonomous System boundary
ip community-list standard WORD
{deny | permit} [LINE]
Creates a standard community list.
ip community-list standard WORD
{deny | permit} [AA:NN | local-AS |
no-advertise | no-export]
ip community-list expanded
WORD {deny | permit} LINE
Creates a expanded community list.
Add entries to the list by repeating the command for different IP addresses.
To delete an entry in the community list, use the following command.
no ip community-list {<1-99> |
<100-199> | WORD}
Deletes an entry of the community-list.
no ip community-list {<1-99> |
<100-199> | WORD} {deny | per-
mit} LINE
no ip community-list standard
WORD [{deny | permit} LINE]
no ip community-list expanded
WORD [{deny | permit} LINE]
To display the entry information of the community list, use the following command.
Shows an entry of the community-list.
show ip community-list {<1-99> | <100-
199> | WORD}
To create an extended community-list and control access to it, use the following com-
mand.
ip extcommunity-list <1-99> {deny
| permit}
Specifies a deny or permit statement of the extended
community-list.
1-99: standard extended community list number
deny: specify extended community to reject.
permit: specify extended community to accept.
LINE: extended community attribute in 'rt
aa:nn_or_IPaddr:nn' OR 'soo
ip extcommunity-list <1-99> {deny
| permit} LINE
To Next Page