Dasan V8102 - Page 698

UMN:CLI User Manual
V8102
698
Command
Mode
Description
show ipv6 ospf
Enable
Global
Shows the information about OSPFv3 protocol.
show ipv6 ospf WORD
Shows the information about a specific process ID in
OSPFv3 protocol.
show ipv6 protocols ospf
Shows a current status of OSPFv3 protocol and its
information.
To display the OSPFv3 database, use the following command.
Command
Mode
Description
show ipv6 ospf [WORD] database
Enable
Global
Shows the OSPFv3 database with op-
tion.
show ipv6 ospf [WORD] database {external | net-
work | router | inter-router | inter-prefix | link |
nssa-external | intra-prefix | grace} [adv-router
A.B.C.D | self-originate ]
show ipv6 ospf database {self-originate | max-
age | adv-router A.B.C.D}
To display the interface information of OSPFv3, use the following command.
Command
Mode
Description
show ipv6 ospf interface [{gigabitethernet |
tengigabitethernet | gpon | channelgroup}
IFPORTS]
Enable
Global
Router
Shows the interface information of
OSPFv3
show ipv6 ospf interface vlan VLANID
To display the information of neighbor route, use the following command.
Command
Mode
Description
show ipv6 ospf [WORD] neighbor
Enable
Global
Shows the information of neighbor rout-
er.
show ipv6 ospf [WORD] neighbor A.B.C.D
show ipv6 ospf [WORD] neighbor INTERFACE
[detail]
show ipv6 ospf [WORD] neighbor interface
vlan VLANID
show ipv6 ospf [WORD] neighbor interface
detail
show ipv6 ospf [WORD] neighbor detail
To display OSPFv3 paths to OSPF routers, use the following command.
Command
Mode
Description
show ipv6 ospf [WORD] topology
Enable
Global
Shows the OSPFv3 paths to OSPF
routers.
show ipv6 ospf [WORD] topology area {<0-