Dasan V8102 - Page 759

User Manual UMN:CLI
V8102
759
To add a MAC address of the ONUs (ONTs) connected to a current OLT, use the following
command.
Command
Mode
Description
olt add-mac ONU-ID MACADDR
VLAN GEM-PORT
Interface
[GPON]
Adds the static MAC addresses of ONU.
ONU-ID: ONU ID (1-128) or serial number
GEM-PORT: GEM port ID
To display a MAC address of the ONUs (ONTs) connected to a current OLT, use the fol-
lowing command.
Command
Mode
Description
show olt mac [ONU-ID [VLANS]]
Interface
[GPON]
Shows the MAC addresses currently learned on ONU.
ONU-ID: ONU ID (1-128) or serial number
show olt mac count [ONU-IDs]
Shows the number of MAC addresses currently
learned on a specified ONT.
To clear MAC addresses learned on a current OLT, use the following command.
Command
Mode
Description
clear olt mac [ONU-ID]
Interface
[GPON]
Clears MAC addresses learned on a current OLT.
clear olt mac ONU-ID [MAC-
ADDR VLAN]
Clears MAC addresses of specified ONU (ONT).
MACADDR: MAC address
VLAN: vlan ID
13.1.26.3 OLT Slot Information
To display the slot information of running SIUs as GPON OLT, use the following command.
Command
Mode
Description
show gpon slot-status
Global
Shows GPON slot information in a chassis
13.1.26.4 GPON Daemon Memory Usage
To display the memory usage of GPON, use the following command.
Command
Mode
Description
show memory gpon
Enable
Global
Shows the memory usage of GPON daemon.