6-12 Removal and Replacement
6. Remove the card hopper by simultaneously pulling back on the transport
chassis and forward on the card hopper.
7. Remove the LCD from the hopper:
A. Reach in from the back of the hopper and press down on the retaining
tab.
B. Lift the LCD away from the retaining tab.
C. Tilt the LCD inward over the top of the retaining tab.
• Note: When pressing against the front of the LCD display, try to avoid
pushing directly on the face of the liquid crystal.
8. Remove the cable from between the hopper walls.
To Next Page
Loading...
