DataCard CP60 - Chapter 5: Adjustments

CP60 and CP60 Plus Service Manual 5-1
Chapter 5: Adjustments
This chapter provides instructions for adjusting the CP60 and CP60
Plus card printers.
General Notes___________________________________________________________________ 5-3
Installing Printer Diagnostics______________________________________________________ 5-3
Using Printer Diagnostics _________________________________________________________ 5-5
Parts of the Diagnostics Window _______________________________________________________5-5
Menu Options ________________________________________________________________________5-6
Changing Printer Values_______________________________________________________________5-8
Viewing and Saving Values ________________________________________________________5-9
Working With Scripts ______________________________________________________________5-10
Setting Printer Value Parameters______________________________________________________5-11
Printer ID_________________________________________________________________________5-11
Card Registration Offset __________________________________________________________5-11
Card Strip Offset _________________________________________________________________5-12
Ribbon Type _____________________________________________________________________5-12
Ribbon Offset ____________________________________________________________________5-12
Vertical Offset ___________________________________________________________________5-12
Transport Speed__________________________________________________________________5-13
YMC, K, T, & F Strobe Duty ________________________________________________________5-13
YMC, K, T, and F Power and Base Power ___________________________________________5-14
Duplex Infeed Offset _____________________________________________________________5-14
Duplex Home Offset______________________________________________________________5-15
Duplex Print Return Offset_________________________________________________________5-15
Duplex Handoff Offset____________________________________________________________5-15
Smart Card Registration Offset ____________________________________________________5-15
Image Clipping Leading and Trailing ______________________________________________5-16
Setting Printer Options________________________________________________________________5-17
Viewing Printer Status ________________________________________________________________5-18
Testing Motors _______________________________________________________________________5-19
Testing Motor Functions ______________________________________________________________5-20
Setting Up Step Tests for the Printer____________________________________________________5-21
Running a Magnetic Stripe Test Card__________________________________________________5-22
Configuring the Magnetic Stripe Module ______________________________________________5-23
Configuring Custom Track Formats____________________________________________________5-25
Running Magnetic Stripe Diagnostics__________________________________________________5-26