3-2 Routine Maintenance
Required Tools and Supplies
The following tools and supplies are needed for routine maintenance procedures.
Description Part Number
Compressed air (canned) TUL001-018
General purpose, non-abrasive cleaner Any
Lint-free cloth TUL001-020
Isopropanol cleaning pen 557492-001
Isopropanol cleaning card 552141-001
Cleaning sleeve 549288-002
Molykote DX grease 807421-001
Cleaners used on the printer’s exterior should not contain any abrasives, oils,
fragrances, antibacterial agents, solvents, or isopropanol. Do not use soft-
scrubbing cleansers, products with petroleum, or products with mineral,
pine, or lemon oil.
CAUTION: Use only canned compressed air on this printer. Do not use
facility air as it will have trace amounts of oil and moisture that will
accumulate on surfaces and possibly damage electronic components.
To Next Page
Loading...
