Digi TransPort LR54 - Page 131

Hotspot Hotspot configuration
Digi TransPort WR Routers User Guide
131
4. Click Splash Page Settings.
5. Set Internal Login URL to http://{UAMIP}:{UAMPORT}/prelogin.
6. Set Internal Logout URL to http://{UAMIP}:{UAMPORT}/logoff.
7. Click Submit.
Configure NAS ID
When you configure the router, you need to set the NAS ID properly so that the router is linked to the
HotspotSystem location that you created. HotspotSystem requires the NAS ID to be a combination of
your HotspotSystem username and the Location ID number in the following format:
username_#
If needed, additional routers can be deployed to expand coverage in an existing location. This is done
by appending a WDS number to the NAS ID as follows:
username_#_wds_#
For example, this is the NAS ID for 3rd router (wds_2) deployed at Location ID 7 for the username
digidotcom:
digidotcom_7_wds_2
Configure allowed domains
HotspotSystem uses various additional domains for payment processing and social media login. While
unauthorized users are automatically able to access hotspotsystem.com, your hotspot configuration
may require unauthorized users to have access to additional domains. These domains need to be
listed by the Allowed Domains option. For example, this may include sites like the following:
n PayPal and other payment processors require access to a number of domains, depending on
which services you select. Contact HotspotSystem for an up-to-date list of domains that need
to be whitelisted.
n FREE Social login requires a number of domains, depending on which services you select.
Refer to the following page for an up-to-date list of social login domains that need to be
whitelisted: Whitelist for hotspot free social login.
Configure the hotspot
Hotspot with HotspotSystem authentication can be configured by using the Web UI or the command
line:
n Web UI instructions
n Command line instructions