Hotspot Hotspot configuration
Digi TransPort WR Routers User Guide
132
Web
1. Enable and configure the hotspot for HotspotSystem authentication:
a. On the menu, click Network > Services > Hotspot.
b. Click Enable to enable the hotspot.
c. For LAN, select a LANfor the hotspot. See Hotspot LANconfiguration for important
information about selecting a LANfor the hotspot.
d. For IP Address, enter the IP address for the hotspot's LAN. The default is 10.1.0.1.
This IP address also defines the subnet that will be used by the hotspot's DHCP
server. See Hotspot DHCP server for more information.
e. For Subnet Mask, enter the subnet mask for the hotspot's LAN. The default is
255.255.255.0.
f. For Auth Mode, select HotspotSystem.
g. For RADIUS NAS ID, enter the NAS ID. The default is hotspot.
h. Click Advanced.
Many of the advanced hotspot settings are optional or contain default values that
normally do not need to be changed.
i. For Server Port, enter the port number for the hotspot server. The default is 4990.
j. For Auth Port, enter the port number for the hotspot authentication server. The
default is 3990.
k. For Max Download and Max Upload, define the throughput limits that will be
applied to clients that connect to the hotspot. Enter the number and selected
either Kbps or Mbps. The default for both is 10 Mbps.
l. For DHCP Lease Length, enter the duration of the DHCP server lease in seconds.
The default is 600 seconds.
m. The Allowed Domains and Allowed Subnets fields define the "white list" of
domains and subnets that unauthenticated clients are able to access. Include the
domain or subnet of supporting servers for payment or other external login and
authentication (such as social media sites). If Remote URL has been selected for
the Login type, the domain for the web server that is being use to serve the remote
HTMLfiles must be included in the white list defined in these fields.
n. Click Apply.
To Next Page
Loading...
