Digi TransPort LR54 - Page 285

Diagnostics and troubleshooting Troubleshooting
Digi TransPort WR Routers User Guide
285
5. Check that you can send and receive command line interface commands, for example, enter
show tech-support:
6. If the command output does not contain any garbled or unusual output, the serial connection is
up and working appropriately.
If the command output has garbled output or unusual characters, continue to the next step.
7. Connect to the TransPort device web interface over the network. See Log in to the web
interface if you need help accessing the web interface.
8. On the web interface, click  System and select Device Console. The Device Console displays.
9. In the Device Console, enter the command serial 1. The serial settings display.