Digi TransPort LR54 - Page 298

Web reference Hotspot page
Digi TransPort WR Routers User Guide
298
Option Description
Auth Mode Specifies the authentication mode for hotspot users:
Click-through: Presents terms of use that must be accepted before
user can continue.
Local shared password: Hotspot users must enter a shared local
password.
RADIUS shared password: Hotspot users must enter a shared
RADIUS password.
RADIUS Users: Hotspot user must enter an assigned RADIUS
username and password.
HotspotSystem: Hotspot is controlled by HotspotSystem.
See Hotspot authentication modes for further information about authentication
modes. The default is Click-through.
Local shared
password
Specifies the password when Auth mode is set to Local shared password.
Primary
RADIUS
server
Specifies the IP address or fully-qualified domain name of the RADIUS server to use
to authenticate hotspot users when Auth mode is set to RADIUSshared password
or RADIUSUsers. Specify an IP address or fully qualified domain name.
RADIUS
server secret
Specifies the shared secret for the RADIUS server when Auth mode is set to
RADIUSshared password or RADIUSUsers. Specify a string up to 64 characters.
RADIUS NAS
ID
Specifies a unique identifier for this network access server (NAS) when Auth mode
is set to RADIUSshared password, RADIUSUsers, or HotspotSystem. The fully-
qualified domain name of the NAS is often used, but any arbitrary string cay be used.
String cannot contain spaces, an open bracket ([), or close bracket (]).
Specify a string from 1 and 64 characters. The default is hotspot.
Advanced options
Option Description
Server
Port
Specifies the port to run the hotspot server on. Specify an integer from from 1 to
65535. The default is 4990.
Auth Port
Specifies the port to run hotspot authentication server on.
Specify an integer from 1 to 65535. The default is 3990.
Max
Download
Specifies the maximum download speed allowed for each client.
Enter an integer from 0 to 100000 and select Kbps or Mbps. The default is 10 Mbps.
Max
Upload
Specifies the maximum upload speed allowed for each client.
Enter an integer from 0 to 100000 and select Kbps or Mbps. The default is 10 Mbps.
Swap
Octets
Specifies whether to swap the meaning of the input octets/packets and output
octets/packets RADIUS attributes when Auth mode is set to RADIUSshared
password or RADIUSUsers. This can fix issues if the data limits and/or accounting
reports appear to be reversed on the RADIUS server. The default is disabled.