Digi TransPort LR54 - Page 299

Web reference Hotspot page
Digi TransPort WR Routers User Guide
299
Option Description
Use UAM
Secret
Enables or disables the use of the UAM secret when Auth mode is set to
RADIUSshared password or RADIUSUsers. This does not typically need to be set
unless integrating with a cloud hotspot provider. The default is disabled.
UAM
Secret
Specifies the secret shared between the UAM server and the hotspot when Auth
mode is set to RADIUSshared password or RADIUSUsers. This does not typically
need to be set unless integrating with a cloud hotspot provider. Specify a string up to
64 characters.
DHCP
lease
length
Specifies the number of seconds until a DHCP lease expires. Specify an integer from 60
to 1000000. The default value is 600.
Secondary
RADIUS
Server
Specifies the IP address or fully-qualified domain name of the backup RADIUS server to
use to authenticate hotspot users when Auth mode is set to RADIUSshared
password or RADIUSUsers. Specify a fully qualified domain name.
RADIUS
Server
Port
Specifies the UDP port number for the RADIUS server when Auth mode is set to
RADIUSshared password or RADIUSUsers. Specify an integer from 1 to 65535. The
default is 1812.
Allowed
Domains
Specifies the domains to which hotspot users have access before hotspot
authentication. Enter a string that is a comma-separated list of domains up to 999
characters.
Allowed
Subnets
Specifies the subnets to which hotspot users have access before hotspot
authentication. Enter a string that is a comma-separated list of domains up to 999
characters.