DNS AS-410M User Manual

Chapter 4 - Operational Procedures -
AS-410M Auto Slide Preparation System 141
③ Abort roughing
Touch CANCEL to pause the rough-cutting operation. Then, the “Roughing is stopping” screen will
appear. Touch CANCEL to abort roughing all together and terminate operation. Alternatively, touch
RESTART on the “Stopping” screen to resume the processing of the same sample.
4-12-7 Roughing completed screen
When the roughing of all set sample blocks is complete, the “Roughing completed” screen appears.
Roughing completed screen
Blinks alternately in
white and yellow.
Roughing is stopping screen

DNS AS-410M Specifications

General

Brand	DNS
Model	AS-410M
Category	Industrial Equipment
Language	English