Chapter 3 -Preoperational Setup-
80
AS-410M Auto Slide Preparation System
② Touch a thumbnail of the tissue image to see a large image.
③ If the trimming is not enough, check below of the box to perform additional cutting.
④ Touch ADD TRIMMING button to perform extra cut of checked sample blocks.
⑤ Touch below box to perform the sample sectioning.
⑥ Touch SLIDE PREPARATION to start auto slide preparation.
⑦ It is possible to start tissue specimen making without auto trimming function. Refer 4-20 for
parameter changes.
3-17-3 Exiting the Auto Trimming (Auto Surface Detection) application
Follow the steps below to exit the Auto Surface Detection application:
① Click the ABORT button on the application screen.
② Click the EXIT button on the screen to exit the application.
③ Turn OFF the power of the PC.
To Next Page
Loading...
Need help?
General