Chapter 3 -Preoperational Setup-
86
AS-410M Auto Slide Preparation System
3-20 Safety interlock (door lock)
When the system is turned on, the safety interlock on the doors and drawers shown below will be
enabled. When it is necessary to perform such works as setting or collecting samples and slides, unlock
the door lock by turning the System power off or by pressing the UNLOCK DOORS button on the
“Preoperational setup” screen (refer to 4-4-1 “Preoperational checks”).
< System with 100-slide dry chamber unit option (DU-100) >
< System with 400-slide dry chamber option unit (DU-400) and 96-sample feeding unit option (BS-96) >
The doors are locked upon system
power-on.
The doors are locked upon system power-on.
To Next Page
Loading...
Need help?
General