Chapter 6 Routine and Daily Maintenance
216
AS-410M Auto Slide Preparation System
6-2 Periodic (monthly) inspection
6-2-1 Power cable inspection
Check the power cables of the System for cracks or any other damage. If any defects are identified,
contact us.
6-2-2 System-internal temperature
If the System-internal temperature fails to drop to or below the prescribed level (22°C) during
operation, check the cooling unit for normal operation and ensure that the System-internal
temperature setting is 22°C.
(When the ambient temperature is high, it may take an hour or longer for the System to cool down
to the prescribed temperature.)
Door of the cooling unit
operation panel
Make sure not to hit your head on the cooler door while checking the cooler
temperature.
Ensure that the cooler door is always closed except when checking the unit.
！ Caution
To Next Page
Loading...
Need help?
General