Chapter 6 Routine and Daily Maintenance
214
AS-410M Auto Slide Preparation System
6-1-3 Compressor check
Turn the compressor power OFF when the System is not in use. (Turn the switch to the 0
position.)
6-1-4 Cleaning of the housing
Use a clean cloth soaked with water or 70-percent ethanol to clean the outside surface of the
housing. Do not use organic solvents.
Do not use thinner or any other organic solvents to clean the external
surface of the housing.
Paraffin waste tray
(drawer)
！ Caution
To Next Page
Loading...
Need help?
General