Chapter 5 Errors and Troubleshooting
210
AS-410M Auto Slide Preparation System
*1 A maximum of 96 for the System with BS-96 (96-block feeding); 24 for the System with BS-24 (24-block
feeding).
*2 A maximum of 400 for Systems with SS (400-slide feeding) and DU-400 (400-slide dry chamber)
options; 100 for Systems other than these.
Error
code
On-screen message Possible cause Solution
9035
<Error Message>
Unit:
LK-400
Part:
LK PC
Symptom:
communication
error
Communication disconnected when PBI
command is received
・Confirm that the software
is running on the PC.
・Confirm that the
communication cable
between the system and PC
is connected.
9036
PBL command response receiving error
9040
PBL command transmission error
9041
PBL command response timeout
9042
Communication disconnected when PBL
command is received
9043
PBL command response receiving error
9050
PSB command transmission error
9051
PSB command response timeout
9052
Communication disconnected when
PSB command is received
9053
PSB command response receiving
error
9060
PSI command
9061
PSI command transmission error
9062
PSI command response timeout
9063
Communication disconnected when
PSI command is received
9064
PSI command response receiving error
To Next Page
Loading...
Need help?
General