Chapter 6 Routine and Daily Maintenance
212
AS-410M Auto Slide Preparation System
This Chapter guides the User through the steps for performing routine maintenance and periodic
inspection necessary to ensure a trouble-free long service life for AS-410M.
●
Before system maintenance and inspection, be sure to turn OFF the system
power and remove the power cords from the power outlets. The time required
to discharge stored energy to a safe level is about one second.
●
This System includes an Extension Device and a Dry Chamber, each
having a heater. The heating elements may remain hot due to residual
heat. Turn OFF the system power, remove the power cords from the
outlets, and wait for 30 minutes or more until the inside cools down
sufficiently to perform maintenance.
！ Warning
To Next Page
Loading...
Need help?
General