Chapter 1 - Overview -
32
AS-410M Auto Slide Preparation System
No. Component No. Component
２４
Carrier tape feeder
３５
Humidifying-water spraying nozzle
２５
Used-carrier tape take-up (Rewinder)
３６
Sample barcode reader
* System with sample identification
option
２６
Slide Glass Cassette set area
* 4 cassettes: System with 400-slide
feeding option
３７
Sample barcode reader unit
* System with sample identification
option
２６‘
Slide Glass Cassette set area
* 1cassette for standard system
３８ Sample holder（tilting stage）
２７
Slide printer unit
(Dot impact printer)
* System with sample identification option
３９
Sample feeder (setting) unit
* System with 24-sample feeding option
２７`
Slide printer unit
(Thermal printer )
* System with sample identification option
４０
Camera for auto trimming
* System with auto trimming option
２８
Slide barcode reader
* System with sample identification option
４１
Diffused illumination for auto trimming
* System with auto trimming option
２９
Stretching stage
４２
Reflected illumination for auto trimming
* System with auto trimming option
３０
Application medium (Application water)
bottle set area
４３
Paraffin waste suction filter
３１
Slide dry chamber temperature controller
４４
Internal System temperature detection
sensor
３２
Stretching plate temperature controller
４５
Sample block surface temperature
sensor
* System with the option
３３
Automatic Blade Change Unit
４６
Blade Mark Check Unit
* System with the option
３４
Used-blade collection box
To Next Page
Loading...
Need help?
General