DNS AS-410M User Manual

Chapter 4 - Operational Procedures -
AS-410M Auto Slide Preparation System 99
＜
When only the Cut Speed Offset is ON
＞
The cut speed changes according to the cut
Force. The humidifying time which is set in
the selected sectioning parameter is applied.
＜
When only the Humidify Time Offset is ON
＞
The humidifying time changes according to
the measured cut forces. The sectioning speed
set in the selected sectioning parameter
is applied.
＜
Cut Speed Offset & Humidify Time Offset
are OFF
＞
Sectioning and humidification are conducted
based on the selected parameter settings.
The measured cut force is not referred to the
sectioning operation.
＜
Cut Force monitor
＞
The monitor displays the measured result of
cut force.
CUT FORCE SETTING screen
( Cut Speed & Humidify Time
Offset functions disabled )
Cut Force Monitor
（
measured result displayed
）
CUT FORCE SETTING screen
(Cut Speed Offset function enabled)
CUT FORCE SETTING screen
(Humidify Time Offset function enabled)

DNS AS-410M Specifications

General

Brand	DNS
Model	AS-410M
Category	Industrial Equipment
Language	English