RECORDING WAVEFORMS
VF6 Infinity Vista 7-9
The printout is identified by the following:
z Patient name and ID.
z Bed label and Care Unit.
z Date and time of the recording request.
z Recording delay and speed.
z Monitored parameters and values.
z Crossed bell symbol for parameters whose alarm is disabled.
z Recording mode (timed or continuous).
z *** or blanks if numeric values and waveforms are unavailable.
The printout shows the top two waveforms that were displayed on the monitor’s
screen at the time of the print request. A small black marker along the bottom of the
printout indicates the time of the print request.
NOTE:
z If the second waveform channel is set to Cascade, only the waveform in the first
waveform channel prints out.
z OCRG recordings cannot be printed on a laser printer.
To Next Page
Loading...
