BIOMEDICAL S UPPORT
VF6 Infinity Vista C-13
Diagnostic Logs
The diagnostic log records major changes that occur in the monitoring environment,
as well as operational errors.
The diagnostic log stores the most recent 200 errors or conditions, along with date and
time of the occurrence. The most recent messages are displayed first. Turn the rotary
knob to scroll through all entries. The codes that appear in the log help DrägerService
identify the cause of error or condition.
STEPS: Displaying the Diagnostic Log
1. Press the Menu fixed key.
2. Click on
Monitor Setup.
3. Click on
Biomed.
4. Enter the Biomed password and click the knob.
5. Click on
Diagnostic Logs.
6. The monitor displays the diagnostic log. Turn the rotary knob clockwise to
scroll back to previous messages. Turn the knob counterclockwise to scroll
forward to current messages.
Changing Units of Measure
You can change the units of measure for the following parameters:
z Temperature — °C (default) or °F
z Pressures — mmHg (default) or kPa
z ST — mm (default) or mV
Upon changing the unit of measure, the monitor displays the New Patient? prompt.
You must admit a new patient and thereby discharge the current patient, or the change
of units does not take effect.
To Next Page
Loading...
