1-4 Infinity Vista VF6
1 OVERVIEW
Electrical Safety
If the AC adapter is disconnected, the monitor “Battery charger” light turns off and the
unit switches immediately to battery power.
Connections to Peripheral Devices
All peripheral devices and connections to the monitor must comply with IEC 60601-1
requirements.
CAUTION: Operate the monitor and any connected devices only in a clinical
environment where the electrical installation is in accordance with local electric codes.
The universal AC adapter should be connected to a fully tested, hospital-grade outlet
with proper grounding.
CAUTION: In the interest of patient safety and equipment performance, Dräger does
not authorize the connection of other manufacturers’ equipment not approved by
Dräger. It is the user's responsibility to contact Dräger to determine compatibility and
warranty status if connections to other manufacturers' equipment are desired.
CAUTION: When connecting peripheral devices to the monitor, make sure that the
entire system complies with the following requirement: IEC 60601-1-1: Safety
requirements for medical electrical systems.
To Next Page
Loading...
