NPB ALARMS
VF6 Infinity Vista 13-11
NPB Alarms
Turn NBP alarms on or off and set alarm limits on the Alarm Limits table (see the
chapter Alarms and Messages). If alarms are on, the monitor alarms for limit
violations as well as patient movements, improper placement of the cuff and
overpressure conditions.
You can set the systolic, mean, and diastolic alarm limits within the following range:
z 10 to 250 mmHg, in increments of 1 mmHg.
NOTE: When an NBP alarm occurs, the monitor alerts you once and, when the alarm
is acknowledged by pressing the Alarm Silence or the All Alarms Off key, does not alert
you again of the same alarm even though displayed values may remain out of limits.
To Next Page
Loading...
