Edge-Core ES4524M-POE

System Management Commands
4-17
4
• This command displays settings for key command modes. Each mode group
is separated by “!” symbols, and includes the configuration mode command,
and corresponding commands. This command displays the following
information:
- Users (names and access levels)
- SNTP server settings
- SNMP community strings
- VLAN database (VLAN ID, name and state)
- VLAN configuration settings for each interface
- Multiple spanning tree instances (name and interfaces)
- IP address configured for the switch
- Spanning tree settings
- Interface settings
- Any configured settings for the console port and Telnet
Example
Related Commands
show running-config (4-18)
Console#show startup-config
building startup-config, please wait...
!
!
username admin access-level 15
username admin password 7 21232f297a57a5a743894a0e4a801fc3
!
username guest access-level 0
username guest password 7 084e0343a0486ff05530df6c705c8bb4
!
enable password level 15 7 1b3231655cebb7a1f783eddf27d254ca
!
snmp-server community public ro
snmp-server community private rw
!
vlan database
vlan 1 name DefaultVlan media ethernet state active
!
interface vlan 1
ip address dhcp
!
line console
!
line vty
!
end
Console#